Tools

Very useful tool for installing pistons. Clamps the piston rings allowing the piston to glide smoothly into place. Suitable for pistons from 45-80mm.

Collet for changing counterpressure springs, makes it easier to screw the central clutch nut. 2nd image shows how simple it is to use. Ideal for wo...

Counterpressure spring mounting tool for convertor units 125-155mm outer diameter.

Universal professional tool set for fitting valve springs from 16-30mm outer diameter. Valves or valve shaft seals require the springs to be remove...

Rotor puller for removing the alternator flywheel. No specific vehicle fitment. 26x1mm thread, but please measure thread prior to ordering.

Spark plug socket, 18mm. Socket is 15mm in length for all NGK plugs with D codes (i.e.: DPR...) and all similar plugs from other manufacturers.

Tyre lever set with hook for linking into spokes. Great third hand when you need it!

Universal chain splitting tool. Makes cutting chains child’s play. 415 - 428 size chains on quads, motorcycles and ATVs.

Tyre levers, 400mm in length with „shovel“ design for better purchase when mounting.

Tyre levers, 240mm in length with „shovel“ design for better purchase when mounting.

Rotor puller for removing the alternator flywheel. No specific vehicle fitment. Attention: On Minarelli the 22x1.5mm thread is suitable for Ducati ...

This special tool for locking the front variator allows for quick and easy dismantling of the variator and is a must for every workshop.

Variator locking tool for removing the front variator.

Naraku M18x1 puller for alternators on 2-stroke Minarelli-based and Minarelli AM engines. Screws onto the existing rotor thread and is tensioned wi...

Spark plug socket, 16mm. Socket is 15mm in length for all NGK plugs with C codes (i.e.: CR...) and all similar plugs from other manufacturers.

Variator locking tool for 4-stroke Kymco engines. With this tool, the pulley is locked against rotation. This allows you to loosen or tighten all c...

Assembly tool for fork adapter - universal

Adjuster wrench for shock preload.

Clutch bell removal tool (locking tool), also loosens the nut under the bell housing. This tool is required for working on the clutch, the rear con...

Universal locking tool for working on the variator, flywheel mass/alternator or clutch. Rotating parts can be hard to loosen and tighten. This univ...

Universal locking tool for opening the clutch and convertor, as well as removing the flywheel. As there is not always a suitable tool for these job...

Universal chain tool for 415-632 chains. Also fine for split link chains. Suitable for motorcycles, mopeds, quads etc. Recommended for 520 and up f...

This rim protector keeps the tyre irons from damaging the rim. Simply slot under the lever to avoid dings and scratches. Paint remains in undamaged...

Alternator rotor puller tool for working on the alternator or the parts behind it. suitable for all Kymco quads over 150cc and Kymco engines over 1...

The rubbing implement allows cleaning of clogged carburettor jets, as well as enlarging the nozzle cross section if you need a larger nozzle. This ...

Tool for adapting jets after tuning work. In 5/100th increments. our Tip: jets can also be enlarged, meaning you may not always need to buy new.