Big Max 50 AC

Naraku unrestricted CDI unit for horizontal Minarelli engines and some 2-stroke Chinese-built models. Not suitable for vehicles with a Ducati ignit...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Malossi piston ring set for all 70cc Malossi sports cylinder for Minarelli and Morini AC + LC engines. Suitable for all 70cc Malossi pistons with 2...

Naraku small end bearing [HD-Quality] - 10x14x13. Suitable for Minarelli and Morini engines with 10mm gudgeon pin.

This aftermarket air box is identical in design and construction to the original. Low-cost replacement for defect items or for returning to origina...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aftermarket carburettor for all 2-stroke scooters with 1E40QMB engines. Minarelli replica air-cooled. Comes with electric choke. Note: In rare case...

39mm clutch nut M28x1 (central nut under the clutch bell). Suitable for Minarelli, Kymco, Peugeot, Honda engines and many more.

Kickstarter wheel [carrier] for upright and horizontal Minarelli and Minarelli-based 2-stroke engines as found in CPI, Keeway, Mawi, Longija etc.

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Cylinder studs including special nuts with M7 thread for securing the cylinder. Set of 4 with nuts. Length: 110mm, nuts are 13mm in length and have...

Standard quality brake shoe set. 2x new springs supplied. Performance and design match the original. Shoe dimensions: 110x23mm For rear brake use. ...

Replacement piston for 70cc Malossi sports cylinder for Minarelli and Morini AC + LC engines with 10mm gudgeon pins. Kit comes with gudgeon pin, 2x...

New style oil filler bolt for Minarelli - Red

Twist Control: an absolute drive innovation from Naraku. Twist Control absorbs the torsion from the converter and even out the loss of power from t...

Rotor puller for removing the alternator flywheel. Our list is based on experience, but you are best to measure threads prior to ordering. Attentio...

Original replacement air filters for PGO Big Max In contrast to the original filter, this air filter is soaked in oil, which results in optimised f...

M12x1.25mm nut for rotor and pulley on the crankshaft. Suitable for all special cranks with M12 thread for Piaggio and Minarelli engines. E.g.: Sta...

The most durable v-belt Polini offers has additional aramid fibre inlays that make this belt extremely resistant to tearing. This is not Polini’s...

Set of 3 Naraku clutch springs for original clutches. 3 different strengths. Engagement point RPM alters in accordance with the value on the spring...

Carburettor flange for mounting push-on carburettor (e.g.: Dellorto, PHBG) for derestricted and restricted Kymco inlet manifolds. Dimensions: 20mm ...

The Heidenau K59 Reinforced is a well-engineered, long-lasting all-weather tyre with great traction in the wet. The profile blocks have been arrang...

The Heidenau K61 Reinforced is a sports-oriented scooter tyre with very good handling and top direction changing. Great mileage and good wet weathe...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Replacement taillight glass for various Derbi, Malaguti, MotorHispania, Peugeot, PGO and Gilera models. The glass is consistent with the dimensions...

Float bowl gasket for Keihin PWK carburettor.

High Quality Racing full circle crankshaft from Top Racing. The specialist Portuguese crankshaft manufacturer is a symbol of high quality crankshaf...

The latest version of the Polini Evolution clutch. The 3G ForRace now has 3 clutch blocks for more powerful action. Adjusting the clutch engagement...

OEM quality small end bearing (10x14x13mm) by the Portuguese manufacturer Top Racing. Suitable for use in original and slightly tuned engines.

Dellorto 17.5 mm carburettor. For scooters with Minarelli or Minarelli-based engines. Recommended even for untuned engines, as the carburettor is e...

Small but great-looking coloured oil filler bolts in blue, red or gold. 1x blue bolt of the required size supplied with relevant O-ring.

Aluminum Kickstarter [Light] suitable for Minarelli and Peugeot engines.

Naraku Sports Contra Spring V.2 Pack, +1000, +1500, +2000 rpm The current version of the Naraku counter pressure spring uses a modified alloy sprin...